CNC Vertical Lathes VT300

Use famous CNC system: FANUC, SIEMENS, etc;
Max. turning dia.: 300mm, 6 station electric turret;
ISO9001:2008;
Manufacture.

Features 

 

This machine uses the domestic and foreign advanced technologies, computerized module design with brand-new structure. The machine needn’t to wait for warming, which can run once start up. The precision and stability is good, cost performance is high, does not take up much area.  It is easy to install it and save labor force. One-time to clamp, that can realize most or all of processing requirements of complex parts, especially to process multispecies and medium and low volume.

 

Patent number: 200920093170.3

 

Technical parameter

PARAMETER ITEM		Model	VT300
Machining capacity	max. swing dia.	mm	500
	max. turning dia.	mm	300
	max. machining height	mm	350
	max. machining load	kg	500
Spindle	motor power	Kw	6.5Kw / 25Hz
	torsion	Nm	105
	transmission ratio (belt)		1:1.5
	(gearbox)		\
	rang of rotation speed(belt)	rpm	30-2000
	(gearbox)	rpm	\
	inner dia. Of front bearing	mm	90
	model of spindle end		A2-6
	dia. Of chunk	mm	200
Feeding	X-axis travel	mm	-40 / 310
	Z-axis travel	mm	350
	X/Z-axis rapid speed	m/min	15 / 18
	distance between spindle nose and turret end	mm	50-400
Accuracy	positioning accuracy	mm	±0.005
	repeatability positioning accuracy	mm	±0.003
Tool turret	type of turret		6 station electric turret / tool post
	center height	mm	63
	distance between the edges of the cutter	mm	230
	standard outer dia.shank dimention	mm	32×32
	standard boring shank dimention	mm	25
Power	Supply voltage	V	380V50HZ
	total power	Kw	12
Dimensions	L×W×H	mm	1400×2000×2400
Net weight		kg	4500

 

 

  

Physical Features

 

Lathe bed design is rib plate multi-sections changing construction. It adopts anti-seismic filling material inside the lathe bed, it can increase the rigidity and aseismicity of lathe.X guide adopts multi-guide exceed locating mode, it can increase the rigidity of lathe and the precision is high.Spindle bear adopts two-front and four-back structure, it can increase the rigidity and anti-seismicity of spindle, the precision is high.The diameter of lead screw is increased 1.5 to 2 times, so that it increases the driving force and enhances cutting rigidity.Lathe adopts advanced pre-positive chip removal, it doesn’t destroy the whole rigidity of lathe. You can also add automatic chip removal device.Lathe adopts fully enclosure hood, it is very elegant.It adopts automatic lubrication device without maintenance.

 

Applied range

 

To process various plates, shells and minor axis parts. Such as gear, bear, brake disc, flywheel, wheel hub, flange plate, valve, pump body, etc. 

 

Standard Scheme

 

GSK 980 CNC system

Fully enclosure hood

Three-color alarm lamp

Frequency conversion spindle motor

Motor-driven cutter/ hydraulic cutter

Air chuck/ hydraulic chuck

Chip removal water box

Automatic lubrication system

Heat exchanger

Electronic hand wheel

Tools & tool box